AURORA XAB-6Z Spherical Plain Bearings - Rod Ends

Grease Speed Rating Open/Shielded n1:4500 rpm; Sealed Speed Rating n3:2800 rpm; d:95.000 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:54000 N; Accessories:Seal & Snap-Ring; D:145.0000 mm; B:24.00 mm; Basic Dynamic Radial Load Rating C:6

r, r1,2 min.:0.3 mm; Mass inner ring:0.033 kg; B:20 mm; d:25 mm; F:30 mm;

Calculation factor f2B:1.04; Calculation factor fHC:1; a:13.6 mm; db min.:48.2 mm; d1:52.6 mm; d:45 mm; Static axial stiffness, preload class A:40 N/µm; ra max.:0.6 mm; Static axial stiffness, preload class B:53 N/µm; D:68 mm;

ra max.:7 mm; D:212.725 mm; r1,2 min.:7 mm; a:46.93 mm; da max.:131 mm; rb max.:3.3 mm; Mass bearing:10.1 kg; d1 ≈:158.1 mm; Limiting speed:3000 r/min; Basic dynamic load rating C:619 kN;

Sealed Speed Rating n3:2000 rpm; d:140.000 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:71000 N; Basic Dynamic Radial Load Rating C:66300 N; D:190.0000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Accessories:One Shield; B:24.00 m

H1:36.5 mm; Limiting speed:1500 r/min; N4:4 mm; Housing:SY 505 M/VZ033; B1:33 mm; d:25.4 mm; L:130 mm; A1:22 mm; H2:16 mm; Thread grub screw G2:M5;

Fatigue load limit Pu:30.5 kN; d:95 mm; Da min.:130 mm; Reference speed:3400 r/min; Basic dynamic load rating C:206 kN; r3,4 min.:1.5 mm; Dimension series:4CC; da max.:106 mm; Ca min.:6 mm; d1 ≈:120.7 mm;

Basic Static Radial Load Rating Co:96500 N; Grease Speed Rating n1:3600 rpm; Accessories:Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:133000 N; Sealed Speed Rating n3:2400 rpm; B:41.00 mm; Oil Speed Rating Open/Shielded n2:4300 rpm; D:180.0000 mm; Fillet Radius ra:2.50 mm; Grease Speed Ratin

H:112 mm; Mass bearing (including seat washer where applicable):75.5 kg; da min.:483 mm; Minimum load factor A:110; d:400 mm; D:540 mm; r1,2 min.:4 mm; Limiting speed:700 r/min; Reference speed:500 r/min; ra max.:3 mm;

d:100 mm; rs (min):2 mm; with cylindrical bore:2 000 min-1; Grease:587 kN; Static (Cor):5.5 mm; Pu:410 kN; with tapered bore:2 800 min-1; Oil:65.790 kN; D:165 mm; Dynamic (Cr):3 mm;

P150°:136 kN; RG:3/4 NPT; PG:1/4 NPT; P90°:236 kN; Cap bolt, SAE grade:8; h:50.8 mm; Adapter sleeve assembly:SNW 30x5.5/16; J1:95.25 mm; J min.:431.8 mm; Cap bolt recommended tightening torque:813.5 N·m;

Fillet Radius ra:2.50 mm; d:100.000 mm; B:47.00 mm; D:215.0000 mm; Grease Speed Rating n1:3000 rpm; Basic Dynamic Radial Load Rating C:190000 N; Oil Speed Rating n2:3900 rpm; Basic Static Radial Load Rating Co:183000 N;

Calculation factor e:0.35; B2 ≈:360 mm; D1 ≈:706 mm; Mass bearing + sleeve:725 kg; Da max.:798 mm; K:12 mm; Calculation factor Y1:1.9; Calculation factor Y0:1.8; Basic static load rating C0:13700 kN; D:830 mm;

B:20 mm; F:25 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.028 kg; d:20 mm;

d3 max.:250.165 mm; G:199.314 mm; B:30.429 mm; d:200 mm; Mass adapter sleeve assembly:16 kg; d1:198.438 mm; Sleeve:S 140x7.13/16; Hydraulic nut:HMVC 40E; B1:179.959 mm; Lock nut:AN 40;